logo canson
logo canson

Tutorial y consejos artísticos

How to ink, wipe and produce good prints?

Twitter icon

Puntúe este artículo

Author : Charlotte Reine

You have engraved your plate, it is ready for the magical moment of printing and discovering the image. Follow these easy tips to produce high quality art prints.


1. Cutting and dampening the paper


Fold your paper and cut it with a knife to obtain a slightly jagged edge. When your paper is cut to the correct format, submerge it sheet by sheet in a tray filled with clear water.

You can use Canson® Edition, ou Canson® Barbizon. Let it soak for one hour for thicker weights (200 to 300 gsm).

Take it out of the tray and drain it. Place a rhodoid sheet and weights on top of your sheets of paper to extract excess water. After printing, dry each sheet between two sheets of blotting paper; the paper must be very flexible, wet to the core and there must be no traces of water on its surface.


2. Inking the plate


Take a small amount of colour and place it on the plate with a “dabber” made of tarlatan.

Apply your ink using small circular movements on the plate so that it penetrates well into all the carvings.




3. Wiping the plate


With a crumpled piece of tarlatan, wipe the plate vigorously at first and then gradually more gently as the image appears.

Change the folds of your crumpled tarlatan as often as possible in order to have clean surfaces.



4. Wiping with tissue paper


Wiping with tissue paper makes it possible to accurately remove the ink left on the non engraved surfaces, without erasing the ink in the carvings.





5. Putting under the press


Place the inked plate on the press at the place where you drew your frame.

Place the damp sheet of paper on the plate and pull down the printing felts (large sheets of soft felt) before putting the press into motion.

After passing under the rolls, remove the felts and discover your printed proof.


Tips: :

  •  You can use a roll for quick single colour inking. Rub firmly during the first wiping to make the ink penetrate the carvings.
  •  Wipe the edges of your plate well after the wiping phase with a cloth dampened with white spirits to avoid black marks around your engraving.
  •  Dry your print immediately between two sheets of blotting paper with weights on top so that your print stays flat.


Productos sugeridos

Canson® Edition

También puede interesarle

El ajuste de la prensa para el grabado
El ajuste de la prensa es un momento importante para la preparación de la estampación. La calidad de la impresión también depende del ajuste de la presión en la prensa de tipo tórculo.
La técnica de China aplicada al grabado.
Esta sencilla técnica permite obtener en el tema grabado un fondo ligeramente distinto del de tu papel habitual, colocando un papel de China sobre la lámina durante la estampación.